License For Snack Bar Inside Terminal Building Of Diu Airport.

Price:Not Estimated

Closing Date:[2019-10-16]

Diu,Daman and Diu, India

engaging Security Guards (civilian) For Guarding Premises Of Government Schools At Daman District

Price:76.63 Lakh

Closing Date:[2019-10-16]

Diu,Daman and Diu, India

End User Drinking Water Survey [sampling And Testing] As Per Is 10500:2012 Guidelines Of All Public Drinking Water Sources In Daman

Price:6.75 Lakh

Closing Date:[2019-10-16]

Diu,Daman and Diu, India

Tender For Purchase Of Allopathic Medicine .

Price:Not Estimated

Closing Date:[2019-10-16]

Diu,Daman and Diu, India

Supply Of Electrical Engineering Laboratory Equipments(1. Experiment Logic Gates Exclusive And Compact Design Straight Forward Representation Of All Logic Gates +5v Smps Adaptor Provided With The Trainer For Power Supply Designed By Considering All The Safety Standards Provided With An Extensive Manual Including Illustration Of All Logic Gates +5v Dc Logic Levels, +5v : High ( Logic 1 ) 0v : Low ( Logic 0 ), Dimensions (mm) : W 240 X D 345 X H 110 Weight : 1 Kg. Study Of And Gate And To Verify Its Truth Table Study Of Or Gate And To Verify Its Truth Table Study Of Not Gate And To Verify Its Truth Table Study Of Nand Gate And To Verify Its Truth Table Study Of Nor Gate And To Verify Its Truth Table Study Of Xor Gate And To Verify Its Truth Table Study Of Xnor Gate And To Verify Its Truth Table 2. Clipper And Clamper Trainer Technical Specification:- Good Quality, Reliable Sockets And Test Points Are Provided Strongly Supported By Systematic Operating Instructions A Low Cost Training System Including Many Experiments Built-in 1khz Sine Wave Generator Mains Supply : 230 V 10%, 50 Hz Sine Wave Generator : 1 Khz, 15v Vpp (approx.) Dc Power Supply : 0 - 5 V (vary Through (2no.) Rotary Switch For Specific Voltage Level) Weight : 1.7 Kgs. (approx.) Dimensions (mm.) : W 260 D 355 H 125 Study Of Series Positive Clipper And Series Negative Clipper Circuits Study Of Shunt Positive Clipper And Shunt Negative Clipper Circuits Study Of Biased Series Positive Clipper And Biased Series Negative, Clipper Circuits, Study Of Biased Shunt Positive Clipper And Biased Shunt Negative, Clipper Circuits, Study Of Combination Clipper Circuit, Study Of Positive And Negative Clamper Circuits, Study Of Biased Clamper Circuits 3. Experimentation With De-morgan's Theorem Technical Specification: Input : +5v Dc, Logic Levels +5v : High(logic 1), 0v : Low (logic 0), Dimensions (mm) : W 240 X D 345 X H 110 Weight : 1kg (approximate), The Setup Performed Following Experiments, Verifying (a+b) = A. B, Verifying (a.b) = A+b4. Experimentation With Adders And Subtractors Technical Specification:- Input : +5v Dc Logic Levels, +5v : High ( Logic 1 ), 0v : Low ( Logic 0 ) Dimensions (mm) : W 240 X D 345 X H 110, Weight : 1 Kg. Scope Of Learning, Study Of Binary Half Adder Binary Full Adder Using Two Half Adders Binary Half Subtractor Binary Full Subtractor 5. Flip-flop Demonstrator Tender Specifications:- Input : +5v Dc Logic Levels +5v : High(logic 1) 0v : Low (logic 0) Dimensions (mm) : W 240 X D 345 X H 110 Weight : 1kg (approximate) Scope Of Learning Study Of S-r Flip-flop And To Verify Its Transition Table Study Of J-k Flip-flop And To Verify Its Transition Table Study Of D Flip-flop And To Verify Its Transition Table Study Of T Flip-flop And To Verify Its Transition Table 6. Encoder And Decoder Trainer Technical Specification:- +5v Smps Adaptor Provided With The Trainer For Power Supply Easy Illustration Of Encoder And Decoder Leds For Visual Indication Of Inputs And Outputs Status Spdt Switches For Logic Selection Good Quality, Reliable Sockets Are Provided At Appropriate Places On Board For Connections Strongly Supported By Systematic Operating Instructions Input : +5v Dc, Logic Levels, +5v : High (logic 1) 0v : Low (logic 0), Dimensions (mm) : 240 W X 345 D X 10 H Weight : 1kg. (approximate), Led Indication : Led Will Be On (glow) For 1 State, And Will Be Off For 0 State, Features: +5v Smps Adaptor Provided With The Trainer For Power Supply Easy Illustration Of Encoder And Decoder Leds For Visual Indication Of Inputs And Outputs Status Spdt Switches For Logic Selection Good Quality, Reliable Sockets Are Provided At Appropriate Places On Board For Connections Strongly Supported By Systematic Operating Instructions Scope Of Learning:- Study And Verification Of The Truth Table Of 8-to-3 Line Encoder. Study And Verification Of The Truth Table Of 3-to-8 Line Decoder. 7. Shift Registers Trainer Technical Specification:- Dc Power Supply : +5v, Logic Levels, +5 V High (logic 1) 0 V Low (logic 0) Led Indication Led Will Be On For Logic High Or '1' State And Will Be Off For Logic Low Or '0' State Dimensions (mm) 260 W X 355 D X 125 H Features:- Stand Alone System Easy Illustration Of All Types Of 3-bit And 4-bit Shift Registers Leds For Visual Indication Of Input And Output Logic States Spdt Switches For Easy Input Logic Selection E-manual Scope Of Learning Study Of 3-bit And 4-bit Serial In Serial Out Shift Register Study Of 3-bit And 4-bit Serial In Parallel Out Shift Register Study Of 3-bit And 4-bit Parallel In Serial Out Shift Register Study Of 3- Bit And 4-bit Parallel In Parallel Out Shift Register 8. Counters Trainer Technical Specifications Input : +5v Dc, Features, Stand Alone System Easy Illustration Of Different Types Of Counters Leds For Visual Indication Of Input And Output Logic States Spdt Switches For Input Logic Selection, E-manual Dc Power Supply : +5 V Dc, Logic Levels +5 V : High (logic 1) 0 V : Low (logic 0), Led Indication : Led Will Be On For Logic High Or '1' State And Will Be Off For Logic Low Or '0' State, Dimensions (mm) : (w) 260 X (d) 355 X (h) 1259. Adc/dac Module Features : 4 Bit Discrete & 8 Bit Monolithic Converters Unipolar & Bipolar Dc Voltages O/p Status Displayed By Led Functional Block Indicated On Board Mimic. Built In Dc Power Supply Technical Specifications : A/d Conversion : 1) 4 Bit Discrete (ramp) 2) 8 Bit Monolithic Converter. Signal Source : Unipolar & Bipolar Dc Voltages O/p Indication : By Leds Separate For Each Type Inter Connections : 4mm Banana Socket Dimensions : W 325 X H 90 X D 255mm Weight : 2 Kg. Approx. Power Supply : 230v 10%, 50hz. Accessories Included : Line Cord, Manuals And Set Of Patch Cords. D/a Converter Features : 4 Bit Weighted Resistor-4 R-2r Network 10 Bit Monolithic D/a Converters. On Board Sine Generator Functional Block Indicated On Board Mimics Built In Dc Power Supply Technical Specifications : D/a Conversion 1) 4 Bit Weighed Resistor 2) 4 Bit R-2r Ladder Network 3) 10 Bit Monolithic D/a Converter Signal : 1) Dc Supply 2) Sine Wave Generator O/p Indication : On Dmmk Or Oscilloscope Inter Connections: 4mm. Banana Sockets. Dimensions : W 325 X H90x D255mm Weight : 2 Kg. Approx. Power Supply : 230v 10%, 50hz Accessories Included : Line Cord, Manuals & Set Of Patch Cords. 10. Display Module Technical Specification:- Display : 16 X 2 Character Lcd, Contrast Control : 0 - 5 V (variable), Backlight Control : 0 - 5 V (variable), Seven Segment Display: 4 Nos., Led Bar Graph: 1 No. Interface : 20 Pin Frc Cable, Test Points : 32 Nos (gold Plated) Power Supply : From Microcontroller Development Platform Nv50xx Series, Dimensions (mm) : W 250 X D 150 X H 80, Weight : 380 Gms Approximately Learning Material : Cd (theory, Procedure, Reference Results, Etc), Online (optional) Included Accessories : Learning Material (cd) : 1 No., Features 16 X 2 Character Lcd Interface, Seven Segment Display Interface, Led Bar Graph Interface, Pc Based Programming, Expansion Connectors For Plug In With Microcontroller Unit And Prototyping Area Every Pin Is Marked In Order To Make The Learning Easier Input/output & Test Points Provided On Board, Exhaustive Learning Material 11. Kelvin Double Bridge Specification Managing Wire Exceptionally Low Temperature Co-efficient Of The Order Of 10.10 -6 / c, Resistance Measurements Conforming To International Standards Din 17471 Remarkably Long Lasting Resistance Values With Excellent Stability. Adherence To Tolerance Values With Excellent Stability. Reproducible Measurements. Wonderful Elastic Limits Of Managing 20kp/mm Perfectly Aged Managing Coils/strips Employed In Kelvin Bridges. Click Type Hard Silver Plated Self-cleaning Switches. Oil Immersed Slide Wire In Senior Kelvin Double Bridge. Wide Resistance Measurement Range 0.02 Micro-ohm Nto 1 Megohm. Solid Brass Blocks For Positive Plug Contacts. Easy-to-control Knobs. Range Of : 0.02 Micro-ohm To 1.1 Ohm).

Price:Not Estimated

Closing Date:[2019-10-17]

Diu,Daman and Diu, India

Supply Of Mechanical Engineering Equipments(1. Two Stage Reciprocating Air Compressor Test Rig (2 H.p.) Air Cooled Intercooler Pressure 6 Kg/cm2 2 H.p Squirrel Cage Induction Motor. An Orifice Type Air Intake Measuring Device With Orifice Plate & U - Tube Manometer, M.s. Air Intake Reservoir Of Size 0.3m X 0.3m X 0.6m Mounted On Iron Stand. 90 Ltr M.s Constructed Air Storage Tank (on-site Service/maintenance For 3 Years) 2. Four Stroke Diesel Engine With Brake Drum Loading System (test Rig) Full Test Rig Setup. A. Engine: Single Cylinder 4 Stroke Diesel Engine (vertical) Of 5 Hp Capacity,isi Marked. B. Dynamometer: Rope Brake Dynamometer,on A Common Base Plate. Brake Drum Of 400 Mm Dia With Cooling Arrangment, Vertical Spring Balance, Hand Wheel, Weight Hanger, Dead Weights For Conducting Experiments. C. Fuel Measuring Device: Fuel Tank Mounted On Iron Stand, Burette Tube, Three Way Cock, Connecting Tube & A Stop Clock. D. Calorimeter: Double Pipe Heat Exchanger To Measure The Heat Loss Through Exhaust Gases. E. Air Intake Measurement: Air Intake Reservoir Of Size 0.3 X 0.3 X 0.5 M. With Orifice Plate, U-tube Manometer Of 0.3 M Height For The Measurement Of Air Flow Rate.f. Cooling Arrangement: Cooling Water Measurement By Rotameter To Determine The Discharge Of Cooling Water. Internal Cooling Water Need For The Engine & Drum Cooling. G. 12 Channel Digital Temperature Indicator: Set Of Thermocouples. (on-site Service/maintenance For 3 Years) 3. Vcrs Test Rig With Capillary Tube And Thermostatic Expansion Valve 1. Compressor : Hermetically Sealed Compressor. 2. Condenser : Air Cooled Condenser Made Out Copper Pipe & Aluminum Fins Of Matching Capacity With Fan Cooling. 3. Evaporator : Copper Coil Immersed In Water. (insulated) 4. Expansion Device : Capillary Tube & Thermostatic Expansion Valve. 5. Energy Meter : One Each For Power Measurement Of Compressor & Evaporator Heater. 6. Pressure Gauge : 2 Nos. For H.p., L.p. Measurement 7. Suitable Filter/drier. 8. Hand Shut Off Type Service Valve. 9. Dimmerstat To Control Power Supply To Heater. 10. Rotameter For Refrigerant Flow Measurement. 11. Immersion Type Electric Heater. 12. Solenoid Valve Castle Italy Make. 13. Set Of Thermocouples. Control Panel : 1. 12 Channel Digital Temperature Indicator 2. Hp-lp Cutout : Make Ranco /danfoss Or Equivalent. 3. Switches : For Compressor, Condenser Fan, Solenoid Valve & Evaporator Heater. 4. Voltmeter : 0 - 250 V. 5. Ammeter : 0 - 15 A. (digital Preferably) 6. Thermostat : Ranco Or Equivalent (on-site Service/maintenance For 3 Years) 4. Window Ac And Split Ac Test Rig 1 . Compressor : Hermetically Sealed Compressor. 2. Condenser : Air Cooled Condenser Made Of Copper Pipe & Aluminum Fins Of Matching Capacity With Fan Cooling. 3. Evaporator : Air Calorimeter Type Evaporator. 4. Expansion Device : Thermostatic Expansion Valve. 5. Energy Meter : For Power Measurement Of Compressor. 6. Pressure Gauge : 2 Nos. For H.p., L.p. Measurement 7. Suitable Filter/drier. 8. Hand Shut Off Type Service Valve.9. Rotameter For Refrigerant Flow Measurement. 10. Duct : Air Duct In Which Evaporator Is Fitted. 11. Blower : Suitable Capacity Blower With Air Control Arrangement. 12. Set Of Thermocouples. Control Panel : 1. 12 Channel Digital Temperature Indicator 2. Hp-lp Cutout : Make Ranco /danfoss Or Equivalent. 3. Switches : For Compressor, Condenser Fan & Blower. 4. Voltmeter : 0 - 250 V. 5. Ammeter : 0 - 15 A (digital Preferably) (on-site Service/maintenance For 3 Years) 5. Refrigerants R-134a , R-22, R-410a 6. Desert Cooler Test Rig. (air Washer) Test Rig 1. Duct : 500 X 500 X 800 Mm Duct 2. Air Fan With Motor : Suction Type Air Fan Fitted On The Top Of The Duct. 3. Set Of Thermocouples. Control Panel 1. 12 Channel Digital Temperature Indicator 2. Switches For Heaters, Pumps & Air Fan. (on-site Service/maintenance For 3 Years) 7. Standard Refrigeration Tool Kit Tube Cutter, Flaring Tool, Swagging Tool, Brazing Torch, Copper Tube Bender, Adjustable Wrench, Flat Edge Screw Driver, Philip Screw Driver, Allen Wrench, Long Nose Plier, Electrical Plier, Slip Joint Plier, Pipe Wrench, Socket Wrench Set, Nut Driver, Box Wrench- 1/4 Of An Inch To 1-1/4 Inch Size, Open Wrench -1/8 Of An Inch To 1-1/4 Inch Size, Flat File, Round File, Tape Measure, Guage Manifold. (1 Year Guarantee) 8. Anemometer Digital Vane Anemometer Portable Display 18mm (0.7") Lcd (liquid Crystal Display), 3 1/2 Digits Operating Temp. 0 To 50 (32 To 122 ) Dimension Instrument : 168 X 80 X 35mm (6.6 X 3.2 X 1.2 Inch) Sensor Head : Round, 72 Mm Dia. Operating Humidity Less Than 80 % Rh Air Velocity Sensor Structure Conventional Twisted Vane Arms And Low-friction Ball-bearing Design Air Velocity Measurement Range Resolution Accuracy M/s 0.4-30.0 M/s 0.1 M/s ( 2%+0.2 M/s) (3 Years Warranty) 9. Temperature Humidity Metertemperature Range(c) -20 To 60 c Humidity Range 0 To 100% Rh Display Large-screen Lcd Resolution - 0.1 c / f (3 Years Warranty) 10. Cooling Tower Test Rig Blower Capacity: 1 Hp Geyser Capacity: 3 Kw Digital Temperature Indicator: No. Of Digits: 4 Digits Temperature Sensors: Rtd Pt- Water Flow Measurement: Rotameter Range: 60 Cc/sec Calibrated Water Tank: Material: Ms With Coated Size: 250 X 250 Mm (on-site Service/maintenance For 3 Years) 11. Vertical Condenser Test Rig Heating Arrangement Rotameter For Flow Measurement Of Cold Range : 0 - 11 Lpm Measuring Cylinder For Condensate Measurement Set Of Thermocouples 12 Channel Digital Temperature Indicator (on-site Service/maintenance For 3 Years) 12. Ic Engine Parts Models (fuel Pump, Different Types Of Carburetors, Different Types Of Injectors- Distributors) 13. Plate Type Heat Exchanger Technical Specifications: System : Water To Water Plates : Material Stainless Steel Water Flow Measurement : By Rotameter One Each For Cold Hot Fluid. Hot Water Tank : Made Of Stainless Steel, Wall, Insulated With Ceramic Wool. Hot Water Circulation : Magnetic Pump. Heaters : Nichrome Wire Heater. Rigid Structure Control Panel: Digital Temp. Controller : 0-199.9c, Water Tank) Digital Temp. Indicator : 0-199.9c, With Multichannel Switch Temperature Sensors : Rtd Pt-100 Type.- Standard Make On/off Switch, Mains Etc. (on-site Service/maintenance For 3 Years) 14. Electronic Refrigerant Leak Detector With Microprocessor Control For Halogen Gas Microprocessor Control With Advanced Signal Processing (dsp) Max. Sensitivity R12,r22,r134a Are Certified <=16g/yr Ultimate Sensitivity <= 6 G/year For All)

Price:Not Estimated

Closing Date:[2019-10-17]

Diu,Daman and Diu, India

Rfp From Reputed Firms/llp Of Chartered/cost Accountants For Appointment As Internal Auditors.

Price:Not Estimated

Closing Date:[2019-10-17]

Diu,Daman and Diu, India

Appointment Of Audit Firms For Conducting Internal Audit Of Diu College,diu Higher Education Society,diu For The Financial Year 2019-20.

Price:Not Estimated

Closing Date:[2019-10-17]

Diu,Daman and Diu, India

Providing Cycle Sharing System At Various Beaches In Daman District For A Period Of 2 (two) Years On License Basis.

Price:Not Estimated

Closing Date:[2019-10-17]

Diu,Daman and Diu, India

Notice Inviting Request For Proposal (rfp) For Appointment Of Firms/llp Of Chartered/cost Accountants To Conduct The Internal Audit Of Diu College For Fy 2019-20.

Price:Not Estimated

Closing Date:[2019-10-17]

Diu,Daman and Diu, India